Shop By Price

Testimonials

Fire Alarm

  • grid
  • list
  • Orien series
    4275 5000

    Availability: In stock

    The Orion series of Microprocessor based fire alarm panels provides a reliable and cost effective solutions to fire detection, from small to large size installations which have 2, 4, 6, 8 & could go up to 60 zones of selecting models and features. These units have been designed to offer high standards of performance, reliability and quality and comply with IS 2189 : 1999 and tested by the ERTL (N).The Orion series panels are specially suited for the small offices, workplaces, small & high rise buildings.
  • Oriel Series
    4275 5000

    Availability: In stock

    The Oriel series of Microprocessor based fire alarm panels are an upgraded version which provides a reliable and cost effective solutions to fire detection, from small to large size installations which have 2, 4, 6, 8 & could go up to 60 zones of selecting models and features. These units have been designed to offer high standards of performance, reliability and quality and comply with IS 2189 : 1999 and tested by the ERTL (N).The Oriel series panels are specially suited for the small offices, workplaces, small & high rise buildings.
  • Manual Call Points AD-101
    4275 5000

    Availability: In stock

    The Manual Call Point is tough, durable & highly visible.A Alarm LED/s is provided inside the Call Point to indicate the Alarm condition.
  • Sounders AD-501
    4275 5000

    Availability: In stock

    The Electronic sounder is designed for use within fire alarm systems, security systems and industrial signaling systems.
  • Sounders (ADESF1)
    4275 5000

    Availability: In stock

    The Electronic sounder is designed for use within fire alarm systems, security systems and industrial signaling systems. Combined sounder and beacon provides an audio-visual warning which is suitable for place which requires high sound output and visual indication.
  • Remote Indicating Lamp AD-301
    4275 5000

    Availability: In stock

    The unit is designed to ensure that Alarm Signal can be actually transmitted to all locations. To prevent any missing signal specially for the close room.
  • Remote Indicating Lamp AD-301 MR
    4275 5000

    Availability: In stock

    The unit is designed to ensure that Alarm Signal can be actually transmitted to all locations. To prevent any missing signal specially for the close room.
  • Remote Indicating Lamp AD-301 MW
    4275 5000

    Availability: In stock

    The unit is designed to ensure that Alarm Signal can be actually transmitted to all locations. To prevent any missing signal specially for the close room.
  • Optical Smoke Cum Heat Detector
    4275 5000

    Availability: In stock

    All of Agni AD333 series detectors meet the requirements of UL 268 and EN 54-7/5 for use in Fire Alarm signaling systems. They are intended for use in 2-wire/4 wire Class A or B supervised zone circuits. The AD 333 Series detectors are subject to panel compatibility limits and compliance with corresponding NFPA 72E standards, local codes, and ordinances.
  • Optical Smoke Detector
    4275 5000

    Availability: In stock

    AD-333 series include 2-wire and 4-wire detectors, which provide fast and reliable response to photoelectric smoke and heat (1350F) detection. While the smoke and heat detection circuits operate independently, their outputs being "OR" connected. The detector provide the fire detection performance by acting as a smoke sensor and / or a 1350F heat detector at the same location.
  • Heat Detector
    4275 5000

    Availability: In stock

    Agni AD-912 series detectors meet the requirements of UL 268 and EN 54-7/5 for use in Fire Alarm signaling systems. They are intended for use in 2-wire/4 wire Class A or B supervised zone circuits. The AD -912 Series detectors are subject to panel compatibility limits and compliance with corresponding NFPA 72E standards, local codes, and ordinances.
  • Sounders AD-502
    4275 5000

    Availability: In stock

    The Electronic sounder is designed for use within fire alarm systems, security systems and industrial signaling systems. Combined sounder and beacon provides an audio-visual warning which is suitable for place which requires high sound output and visual indication.
  • XFP 1-2 Loop Networkable Analogue
    4275 5000

    Availability: In stock

    XFP Networkable one loop 32 zone panel Agni Context Plus XP95 protocol. Code entry, c/w 3A psu, metal enclosure. XFP Networkable one loop 32 zone panel Agni Context Plus XP95 protocol. Keyswitch entry, c/w 3A psu, metal enclosure.
  • Fire Plus 4-32 Loop Networkable Anologue
    4275 5000

    Availability: In stock

    The Oriel series of Microprocessor based fire alarm panels are an upgraded version which provides a reliable and cost effective solutions to fire detection, from small to large size installations which have 2, 4, 6, 8 & could go up to 60 zones of selecting models and features. These units have been designed to offer high standards of performance, reliability and quality and comply with IS 2189 : 1999 and tested by the ERTL (N).The Oriel series panels are specially suited for the small offices, workplaces, small & high rise buildings.
  • Ionisation Smoke Detector
    4275 5000

    Ionisation Smoke Detector

    Availability: In stock

    The Context Plus XP95 ionisation smoke detector has a moulded self-extinguishing white polycarbonate case with wind resistant smoke inlets. Stainless steel wiper contacts connect the detector to the terminals in the mounting base. Inside the detector case is a printed circuit board that has the ionisation chamber mounted on one side and the address capture, signal processing and communications electronics on the other. The ionisation chamber system is an inner reference chamber contained inside an outer smoke chamber. The outer smoke chamber has smoke inlet apertures that are fitted with an insect resistant mesh. The radioactive source holder and the outer smoke chamber are the positive and negative electrodes respectively. An americium 241 radioactive source mounted within the inner reference chamber irradiates the air in both chambers to produce positive and negative ions. On applying a voltage across these electrodes an electric field is formed. The ions are attracted to the electrode of the opposite sign, some ions collide and recombine, but the net result is that a small electric current flows between the electrodes.
  • Temprature Detectors
    4275 5000

    Availability: In stock

    Context Plus XP95 temperature (heat) detectors have a common profile with ionisation and optical smoke detectors but have a low air flow resistance case made of self-extinguishing white polycarbonate. They monitor temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. The response to temperature increases of the standard temperature detector (part no: 55000-400IMC) enables the detector to be utilized as an EN54 Grade 2 heat detector. To provide a device for use in ambient temperatures of up to 50?C, a high temperature detector (part no: 55000-401IMC) is also available. This has similar characteristics to the standard temperature detector at 25?C but reaches a 55 count (alarm) at 90?C.
  • Multisensor Detector
    4275 5000

    Availability: In stock

    The Context Plus XP95 multisensor detector contains an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value. The multisensor construction is similar to that of the optical detector but uses a different lid and optical mouldings to accommodate the thermistor temperature sensor. The sectional view (below) shows the arrangement of the optical chamber and thermistor. The signals from the optical smoke sensing element and the temperature sensor are independent, and represent the smoke level and the air temperature respectively in the vicinity of the detector. The detector?s microcontroller processes the two signals. The temperature signal processing extracts only rate of rise information for combination with the optical signal. The detector will not respond to a slow temperature increase ? even if the temperature reaches a high level. A large sudden change in temperature can, however, cause an alarm without the presence of smoke, if sustained for 20 seconds.
  • Manual Call Points
    4275 5000

    Availability: In stock

    The Context Plus XP95 manual call point is tough, durable and highly visible. A single alarm LED is provided on the call point. This LED is controlled, independently of the call point, by the control and indicating equipment (CIE). The call point?s address is set at the commissioning stage by means of a seven-segment DIL switch. Call points can be remotely tested from the CIE by transmission of a single bit in the communications protocol. Call points respond by providing a value of 64 which corresponds to the alarm value. The CIE should recognize this response as a test signal and should not raise a general alarm. The call point is available in two versions: Part number: 55000-905IMC for surface mounting, incorporating the call point assembly (55000-900IMC), and a back box (26729-107).
  • Mounting Bases
    4275 5000

    Availability: In stock

    All Context Plus XP95 smoke and heat detectors fit the Context Plus XP95 mounting bases. The base is a zero insertion force base with dual finger receptacles of stainless steel into which the detector terminals slide. Cable connections of up to 2.5mm diameter are made via captive cable clamps. There are four double terminals and one single terminal. L1 line IN and OUT, double terminal L2 line IN and OUT, double terminal + Rremote LED positive supply, double terminal - Rremote LED negative supply, double terminal The remaining single terminal is is
  • 20D Ioslating Bases
    4275 5000

    Availability: In stock

    The Context Plus XP95 20D isolating base senses and isolates short circuit faults on loops and spurs. The base is loop powered, polarity sensitive and accepts the XPERT card to set the associated device address. In short circuit conditions, the integral yellow LED is illuminated. The detector associated with the base remains active under short circuit conditions. Power and signals to the affected section are restored automatically when the fault is cleared. Under normal operating conditions, a low impedance is present between the ? IN and ? OUT terminals of the base, so that power and signals pass to the next base in the line. If a short circuit or abnormally low impedance occurs, the fall in voltage is sensed and the base isolates the negative supply in the direction of the fault.
  • Sounder & Sounder Beacons
    4275 5000

    Availability: In stock

    Straightforward DIL switch addressing. Attractive low profile design Excellent lateral sound distribution. Three evacuate tones (continuous, warble or sweep) and one Alert tone High (100dB @ 1m) and low (94dB @ 1m) volume settings A BS5839 part 1 2002 Clause 12.2.2 compliant locking facility A ?quick-fit? bayonet fixing arrangement ?Master? or ?shadow? mode operation (allows multiple shadow sounders to be given the same ID address as one ?master? sounder, a useful feature on heavily populated systems and to give synchronized sounding) A group addressing facility allowing multiple sounders to be activated simultaneously IP43 rated shallow and IP65 rated deep base versions are available.
  • Switch Monitor With Isolator
    4275 5000

    Availability: In stock

    The Context Plus XP95 Switch Monitor with isolator is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Context Plus compatible control equipment.
  • Input/Output Unit With Isolator
    4275 5000

    Availability: In stock

    The Context Plus XP95 Input/Output Unit with isolator provides two voltage-free, single pole, change-over relay outputs, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.
  • Zone Monitor With Isolator
    4275 5000

    Availability: In stock

    The Context Plus XP95 Zone Monitor with Isolator powers and controls the operation of a zone of up to 20 series 65 conventional fire detectors from a loop of Context Plus analogue addressable detectors and interfaces.
  • Sounder Control Unit With Isolator
    4275 5000

    Availability: In stock

    The Context Plus XP95 Sounder Control Unit with Isolator is used to control the operation of a zone of externally powered sounders and to report their status to Context Plus-compatible control equipment.
  • 99 Zone Alaram Panel
    4275 5000

    Availability: In stock

    The detectors can automatically match codes with alarm host. It?s simple and fast.
  • 999 ZOne Alarm Panel With Printer
    4275 5000

    Availability: In stock

  • 8-Zone Telephone Alarm Sysytem
    4275 5000

    Availability: In stock

  • Emitter
    4275 5000

    Availability: In stock

  • Key Fob
    4275 5000

    Availability: In stock

Scroll